The method of steam cleaning your carpet entails hot water getting fed to a spray extraction tool or wand, coupled to a pump vacuum power unit. The cleaning formula is injected under pressure deep into the carpet via water jet nozzles.
The water is able to penetrate the fiber all of the way down to the backing. This process will loosen any embedded soil, eliminate oil and grease deposits, and get your carpet cleaner than it has ever been.
There are many types and makes of steam carpet cleaners obtainable on the market, ranging from small portables to big and very effective truck mounted units. The principle would be the same regardless of what model you choose.
The models that are truck mounted are created to ensure that only the hose and the wand are taken into the region being cleaned. These units are quite powerful, delivering hot water and producing a high vacuum recovery which could be powered by diesel fuel, gas, propane, or even by the motor of the truck.
Most carpet manufacturers, fiber producers, and professional cleaners endorse this process for achieving soil removal efficiency. Using the present state of art equipment and technology, we are much more than capable of high production and cleaning of carpet.
The actual disadvantage to steam carpet cleaning are the difficulties that are related with over wetting and longer drying periods. These may be eliminated however, by a skilled operator who makes use of equipment which is properly maintained and in good all round operating condition.
Presently, you’ll discover two techniques being employed with steam carpet cleaning.
1. This method entails a traffic lane cleaner being sprayed onto the traffic lanes then agitated into the fibers. The entire region is then cleaned by making use of a hot water extractor that has a cleaning formula being injected into the fibers via the wand.
2. The second method entails a free rinse emulsifying pre-spray being dispersed onto the whole carpet, then agitated into the fibers.
Steam cleaning procedures
1. Prepare the equipment and supplies. In a pump or power sprayer you need to mix the free rinsing pre-spray. In the solution tank of the extractor, mix the rinsing agent.
2. In case you have a lot of furniture to move, make a floor plan.
3. If the region being cleaned has furniture, you need to take out as much as possible.
4. Completely vacuum the carpet. If ever the pile is crushed or matted, use a pile brush to loosen the soils which will make vacuuming more effective.
5. Pre-spray a reasonable amount of the pre-spray.
6. Using a grooming tool, agitate the pre spray deep into the fibers then allow it to sit for 10 – 15 minutes, making sure that it doesn’t dry out.
7. Extract the region making use of a portable, truck mounted, or automatic carpet cleaner.
8. Repeat steps 5 through 7 until the whole region has been cleaned.
9. Groom the cleaned region, replace all furniture that was removed, then clean all equipment which you used.
